DEBUG 2020-02-11 06:46:06,434 (Z-Wave): Command_Builder             : Building Z-Wave command
DEBUG 2020-02-11 06:46:06,434 (Z-Wave): Command_Builder             : Z-Wave command: nodeId = '1', endPoint = '0'
DEBUG 2020-02-11 06:46:06,434 (Z-Wave): Command_Builder             : Z-Wave command: command = SECURE_INCLUSION_MODE_ON
DEBUG 2020-02-11 06:46:06,434 (Z-Wave): Controller_API              : Enqueue (WORKING-Queue, Count=1) Z-Wave function call 'ZW_AddNodeToNetwork(Mode(s)=[ADD_NODE_ANY, ADD_NODE_OPTION_HIGH_POWER, ADD_NODE_OPTION_NETWORK_WIDE], CallbackID=0x00)'.
DEBUG 2020-02-11 06:46:06,434 (Z-Wave): Controller_API              : Dequeue (WORKING-Queue, Count=0) Z-Wave function call 'ZW_AddNodeToNetwork(Mode(s)=[ADD_NODE_ANY, ADD_NODE_OPTION_HIGH_POWER, ADD_NODE_OPTION_NETWORK_WIDE], CallbackID=0x00)'.
DEBUG 2020-02-11 06:46:06,434 (Z-Wave): TX_Session_Layer            : Executing Z-Wave function call 'ZW_AddNodeToNetwork(Mode(s)=[ADD_NODE_ANY, ADD_NODE_OPTION_HIGH_POWER, ADD_NODE_OPTION_NETWORK_WIDE], CallbackID=0x00)'...
DEBUG 2020-02-11 06:46:06,434 (Z-Wave): TX_Session_Layer            : Sending Z-Wave function 'ZW_AddNodeToNetwork(Mode(s)=[ADD_NODE_ANY, ADD_NODE_OPTION_HIGH_POWER, ADD_NODE_OPTION_NETWORK_WIDE], CallbackID=0x21)' call.
DEBUG 2020-02-11 06:46:06,434 (Z-Wave): TX_Frame_Layer              : Send data frame [0x01, 0x05, 0x00, 0x4A, 0xC1, 0x21, 0x50].
DEBUG 2020-02-11 06:46:06,434 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x06]
DEBUG 2020-02-11 06:46:06,434 (Z-Wave): RX_Frame_Layer              : ACK -> Data frame [0x01, 0x05, 0x00, 0x4A, 0xC1, 0x21, 0x50] transmission OK.
DEBUG 2020-02-11 06:46:06,434 (Z-Wave): RX_Session_Layer            : ACK -> Z-Wave function 'ZW_AddNodeToNetwork(Mode(s)=[ADD_NODE_ANY, ADD_NODE_OPTION_HIGH_POWER, ADD_NODE_OPTION_NETWORK_WIDE], CallbackID=0x21)' has been successfully sent --> waiting '10 000' [ms] for 'ADD_NODE_STATUS_LEARN_READY' callback.
DEBUG 2020-02-11 06:46:06,434 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x01]
DEBUG 2020-02-11 06:46:06,434 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x07, 0x00, 0x4A, 0x21, 0x01, 0x00, 0x00, 0x92]
DEBUG 2020-02-11 06:46:06,434 (Z-Wave): RX_Frame_Layer              : Data frame [0x01, 0x07, 0x00, 0x4A, 0x21, 0x01, 0x00, 0x00, 0x92] has been received.
DEBUG 2020-02-11 06:46:06,434 (Z-Wave): RX_Session_Layer            : Z-Wave function 'ZW_AddNodeToNetwork(Mode(s)=[ADD_NODE_ANY, ADD_NODE_OPTION_HIGH_POWER, ADD_NODE_OPTION_NETWORK_WIDE], CallbackID=0x21)' has received 'ADD_NODE_STATUS_LEARN_READY' callback --> waiting '60 000' [ms] for 'ADD_NODE_STATUS_NODE_FOUND' callback.
DEBUG 2020-02-11 06:46:17,847 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x01]
DEBUG 2020-02-11 06:46:17,847 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x07, 0x00, 0x4A, 0x21, 0x02, 0x00, 0x00, 0x91]
DEBUG 2020-02-11 06:46:17,847 (Z-Wave): RX_Frame_Layer              : Data frame [0x01, 0x07, 0x00, 0x4A, 0x21, 0x02, 0x00, 0x00, 0x91] has been received.
DEBUG 2020-02-11 06:46:17,847 (Z-Wave): RX_Session_Layer            : Z-Wave function 'ZW_AddNodeToNetwork(Mode(s)=[ADD_NODE_ANY, ADD_NODE_OPTION_HIGH_POWER, ADD_NODE_OPTION_NETWORK_WIDE], CallbackID=0x21)' has received 'ADD_NODE_STATUS_NODE_FOUND' callback frame [Status: ADD_NODE_STATUS_NODE_FOUND, Callback ID: 0x21, Node ID: 0, Device Classes: [Basic: 0x00, Generic: 0x00, Specific: 0x00], Command Classes: [Supported: [ -- ], Controlled: [ -- ]]] --> waiting '76 000' [ms] for 'ADD_NODE_STATUS_ADDING_SLAVE' or 'ADD_NODE_STATUS_ADDING_CONTROLLER' callback.
DEBUG 2020-02-11 06:46:18,052 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x01]
DEBUG 2020-02-11 06:46:18,052 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x10, 0x00, 0x4A, 0x21, 0x03, 0x3C, 0x09, 0x04, 0x40, 0x03, 0x5E, 0x98, 0x9F, 0x55, 0x72, 0x8A, 0x01]
DEBUG 2020-02-11 06:46:18,052 (Z-Wave): RX_Frame_Layer              : Data frame [0x01, 0x10, 0x00, 0x4A, 0x21, 0x03, 0x3C, 0x09, 0x04, 0x40, 0x03, 0x5E, 0x98, 0x9F, 0x55, 0x72, 0x8A, 0x01] has been received.
DEBUG 2020-02-11 06:46:18,053 (Z-Wave): RX_Session_Layer            : Z-Wave function 'ZW_AddNodeToNetwork(Mode(s)=[ADD_NODE_ANY, ADD_NODE_OPTION_HIGH_POWER, ADD_NODE_OPTION_NETWORK_WIDE], CallbackID=0x21)' has received 'ADD_NODE_STATUS_ADDING_SLAVE' callback frame [Status: ADD_NODE_STATUS_ADDING_SLAVE, Callback ID: 0x21, Node ID: 60, Device Classes: [Basic: 0x04, Generic: 0x40, Specific: 0x03], Command Classes: [Supported: [COMMAND_CLASS_ZWAVEPLUS_INFO, COMMAND_CLASS_SECURITY, 0x9F, COMMAND_CLASS_TRANSPORT_SERVICE, COMMAND_CLASS_MANUFACTURER_SPECIFIC, COMMAND_CLASS_TIME], Controlled: [ -- ]]] --> waiting for 'ADD_NODE_STATUS_PROTOCOL_DONE' callback.
DEBUG 2020-02-11 06:46:37,362 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x01]
DEBUG 2020-02-11 06:46:37,362 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x07, 0x00, 0x4A, 0x21, 0x05, 0x3C, 0x00, 0xAA]
DEBUG 2020-02-11 06:46:37,362 (Z-Wave): RX_Frame_Layer              : Data frame [0x01, 0x07, 0x00, 0x4A, 0x21, 0x05, 0x3C, 0x00, 0xAA] has been received.
DEBUG 2020-02-11 06:46:37,362 (Z-Wave): RX_Session_Layer            : Z-Wave function 'ZW_AddNodeToNetwork(Mode(s)=[ADD_NODE_ANY, ADD_NODE_OPTION_HIGH_POWER, ADD_NODE_OPTION_NETWORK_WIDE], CallbackID=0x21)' has received 'ADD_NODE_STATUS_PROTOCOL_DONE' callback frame [Status: ADD_NODE_STATUS_PROTOCOL_DONE, Callback ID: 0x21, Node ID: 60, Device Classes: [Basic: 0x00, Generic: 0x00, Specific: 0x00], Command Classes: [Supported: [ -- ], Controlled: [ -- ]]].
DEBUG 2020-02-11 06:46:37,362 (Z-Wave): TX_Session_Layer            : Sending Z-Wave function 'ZW_AddNodeToNetwork(Mode=ADD_NODE_STOP, callback ID: 0x21)' call.
DEBUG 2020-02-11 06:46:37,362 (Z-Wave): TX_Frame_Layer              : Send data frame [0x01, 0x05, 0x00, 0x4A, 0x05, 0x21, 0x94].
DEBUG 2020-02-11 06:46:37,362 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x06]
DEBUG 2020-02-11 06:46:37,362 (Z-Wave): RX_Frame_Layer              : ACK -> Data frame [0x01, 0x05, 0x00, 0x4A, 0x05, 0x21, 0x94] transmission OK.
DEBUG 2020-02-11 06:46:37,362 (Z-Wave): RX_Session_Layer            : ACK -> Z-Wave function 'ZW_AddNodeToNetwork(Mode=ADD_NODE_STOP, callback ID: 0x21)' has been successfully sent --> waiting '500' [ms] for 'ADD_NODE_STATUS_DONE' callback.
DEBUG 2020-02-11 06:46:37,418 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x01]
DEBUG 2020-02-11 06:46:37,418 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x07, 0x00, 0x4A, 0x21, 0x06, 0x3C, 0x00, 0xA9]
DEBUG 2020-02-11 06:46:37,418 (Z-Wave): RX_Frame_Layer              : Data frame [0x01, 0x07, 0x00, 0x4A, 0x21, 0x06, 0x3C, 0x00, 0xA9] has been received.
DEBUG 2020-02-11 06:46:37,418 (Z-Wave): RX_Session_Layer            : Callback received [0x01, 0x07, 0x00, 0x4A, 0x21, 0x06, 0x3C, 0x00, 0xA9] -> Z-Wave function 'ZW_AddNodeToNetwork(Mode=ADD_NODE_STOP, callback ID: 0x21)' successfully executed.
DEBUG 2020-02-11 06:46:37,418 (Z-Wave): TX_Session_Layer            : Sending Z-Wave function 'ZW_AddNodeToNetwork(Mode=ADD_NODE_STOP)' call.
DEBUG 2020-02-11 06:46:37,418 (Z-Wave): TX_Frame_Layer              : Send data frame [0x01, 0x04, 0x00, 0x4A, 0x05, 0xB4].
DEBUG 2020-02-11 06:46:37,418 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x06]
DEBUG 2020-02-11 06:46:37,418 (Z-Wave): RX_Frame_Layer              : ACK -> Data frame [0x01, 0x04, 0x00, 0x4A, 0x05, 0xB4] transmission OK.
DEBUG 2020-02-11 06:46:37,418 (Z-Wave): RX_Session_Layer            : ACK -> Z-Wave function 'ZW_AddNodeToNetwork(Mode=ADD_NODE_STOP)' successfully executed.
DEBUG 2020-02-11 06:46:37,418 (Z-Wave): Inclusion_Manager           : Node '60' : [ZWAddNodeToNetwork, Status=ADD_NODE_STATUS_DONE, Supported=[COMMAND_CLASS_ZWAVEPLUS_INFO, COMMAND_CLASS_SECURITY, COMMAND_CLASS_UNKNOWN, COMMAND_CLASS_TRANSPORT_SERVICE, COMMAND_CLASS_MANUFACTURER_SPECIFIC, COMMAND_CLASS_TIME], Controlled=[]]
DEBUG 2020-02-11 06:46:37,418 (Z-Wave): Secure_Inclusion_Manager    : Node '60' : [COMMAND_CLASS_SECURITY::SECURITY_SCHEME_GET]
DEBUG 2020-02-11 06:46:37,418 (Z-Wave): Controller_API              : Enqueue (WORKING-Queue, Count=1) Z-Wave function call 'ZW_SendData(NodeID=60, Payload=[0x98, 0x04, 0x00], TxOptions=[TRANSMIT_OPTION_AUTO_ROUTE, TRANSMIT_EXPLORE_OPTION_ACK], CallbackID=0x00)'.
DEBUG 2020-02-11 06:46:37,418 (Z-Wave): Controller_API              : Dequeue (WORKING-Queue, Count=0) Z-Wave function call 'ZW_SendData(NodeID=60, Payload=[0x98, 0x04, 0x00], TxOptions=[TRANSMIT_OPTION_AUTO_ROUTE, TRANSMIT_EXPLORE_OPTION_ACK], CallbackID=0x00)'.
DEBUG 2020-02-11 06:46:37,418 (Z-Wave): TX_Session_Layer            : Executing Z-Wave function call 'ZW_SendData(NodeID=60, Payload=[0x98, 0x04, 0x00], TxOptions=[TRANSMIT_OPTION_AUTO_ROUTE, TRANSMIT_EXPLORE_OPTION_ACK], CallbackID=0x00)'...
DEBUG 2020-02-11 06:46:37,418 (Z-Wave): TX_Session_Layer            : Send (repeat count=1) Z-Wave function 'ZW_SendData(NodeID=60, Payload=[0x98, 0x04, 0x00], TxOptions=[TRANSMIT_OPTION_AUTO_ROUTE, TRANSMIT_EXPLORE_OPTION_ACK], CallbackID=0x22)' request (callback ID=0x22).
DEBUG 2020-02-11 06:46:37,418 (Z-Wave): TX_Frame_Layer              : Send data frame [0x01, 0x0A, 0x00, 0x13, 0x3C, 0x03, 0x98, 0x04, 0x00, 0x05, 0x22, 0x62].
DEBUG 2020-02-11 06:46:37,418 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x06]
DEBUG 2020-02-11 06:46:37,418 (Z-Wave): RX_Frame_Layer              : ACK -> Data frame [0x01, 0x0A, 0x00, 0x13, 0x3C, 0x03, 0x98, 0x04, 0x00, 0x05, 0x22, 0x62] transmission OK.
DEBUG 2020-02-11 06:46:37,418 (Z-Wave): RX_Session_Layer            : ACK -> Z-Wave function 'ZW_SendData(NodeID=60, Payload=[0x98, 0x04, 0x00], TxOptions=[TRANSMIT_OPTION_AUTO_ROUTE, TRANSMIT_EXPLORE_OPTION_ACK], CallbackID=0x22)' has been successfully sent - waiting 5 000 [ms] for response frame.
DEBUG 2020-02-11 06:46:37,446 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x01]
DEBUG 2020-02-11 06:46:37,446 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x04, 0x01, 0x13, 0x01, 0xE8]
DEBUG 2020-02-11 06:46:37,446 (Z-Wave): RX_Frame_Layer              : Data frame [0x01, 0x04, 0x01, 0x13, 0x01, 0xE8] has been received.
DEBUG 2020-02-11 06:46:37,446 (Z-Wave): RX_Session_Layer            : 'ZW_SendData' response [0x01, 0x04, 0x01, 0x13, 0x01, 0xE8] with status 'RETURN_VALUE_TRUE' received (callback ID=0x22).
DEBUG 2020-02-11 06:46:37,446 (Z-Wave): RX_Session_Layer            : Waiting 64 973 [ms] for 'ZW_SendData' callback frame (callback ID=0x22).
DEBUG 2020-02-11 06:46:37,472 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x01]
DEBUG 2020-02-11 06:46:37,472 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x07, 0x00, 0x4A, 0x21, 0x06, 0x3C, 0x00, 0xA9]
DEBUG 2020-02-11 06:46:37,472 (Z-Wave): RX_Frame_Layer              : Data frame [0x01, 0x07, 0x00, 0x4A, 0x21, 0x06, 0x3C, 0x00, 0xA9] has been received.
DEBUG 2020-02-11 06:46:39,962 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x01]
DEBUG 2020-02-11 06:46:39,962 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x09, 0x00, 0x04, 0x00, 0x3C, 0x03, 0x98, 0x05, 0x00, 0x50]
DEBUG 2020-02-11 06:46:39,962 (Z-Wave): RX_Frame_Layer              : Data frame [0x01, 0x09, 0x00, 0x04, 0x00, 0x3C, 0x03, 0x98, 0x05, 0x00, 0x50] has been received.
DEBUG 2020-02-11 06:46:39,962 (Z-Wave): RX_Session_Layer            : Node '60' : [APP_CMD_HANDLER_FRAME : NodeID='60', Status=[RECEIVE_STATUS_TYPE_SINGLE], CommandClass='COMMAND_CLASS_SECURITY', Command='0x05', Parameters: [0x00]]
DEBUG 2020-02-11 06:46:42,785 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x01]
DEBUG 2020-02-11 06:46:42,785 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x05, 0x00, 0x13, 0x22, 0x00, 0xCB]
DEBUG 2020-02-11 06:46:42,785 (Z-Wave): RX_Frame_Layer              : Data frame [0x01, 0x05, 0x00, 0x13, 0x22, 0x00, 0xCB] has been received.
DEBUG 2020-02-11 06:46:42,785 (Z-Wave): RX_Session_Layer            : Callback [0x01, 0x05, 0x00, 0x13, 0x22, 0x00, 0xCB] (callback ID=0x22) with state 'TRANSMIT_COMPLETE_OK' received -> Z-Wave function 'ZW_SendData(NodeID=60, Payload=[0x98, 0x04, 0x00], TxOptions=[TRANSMIT_OPTION_AUTO_ROUTE, TRANSMIT_EXPLORE_OPTION_ACK], CallbackID=0x22)' successfully executed.
DEBUG 2020-02-11 06:46:42,785 (Z-Wave): RX_Session_Layer            : Add function to pending transaction list (size='1') : ZW_SendData(NodeID=60, Payload=[0x98, 0x04, 0x00], TxOptions=[TRANSMIT_OPTION_AUTO_ROUTE, TRANSMIT_EXPLORE_OPTION_ACK], CallbackID=0x22)
ERROR 2020-02-11 06:46:47,795 (Z-Wave): Secure_Inclusion_Manager    : Node '60' : [COMMAND_CLASS_SECURITY::SECURITY_SCHEME_GET] failed : 'COMMAND_CLASS_REPORT_TIMEOUT_ERROR'.
ERROR 2020-02-11 06:46:47,810 (Z-Wave): Inclusion_Manager           : Node '60' : The security enabled Z-Wave node has been added to the *NON SECURE* Z-Wave network because failed to set the network key.
DEBUG 2020-02-11 06:46:47,810 (Z-Wave): Controller                  : Retrieving Z-Wave node info (ID=60)...
DEBUG 2020-02-11 06:46:47,818 (Z-Wave): Controller_API              : Enqueue (WORKING-Queue, Count=1) Z-Wave function call 'ZW_GetNodeProtocolInfo(NodeID=60)'.
DEBUG 2020-02-11 06:46:47,818 (Z-Wave): Controller_API              : Dequeue (WORKING-Queue, Count=0) Z-Wave function call 'ZW_GetNodeProtocolInfo(NodeID=60)'.
DEBUG 2020-02-11 06:46:47,818 (Z-Wave): TX_Session_Layer            : Executing Z-Wave function call 'ZW_GetNodeProtocolInfo(NodeID=60)'...
DEBUG 2020-02-11 06:46:47,818 (Z-Wave): TX_Frame_Layer              : Send data frame [0x01, 0x04, 0x00, 0x41, 0x3C, 0x86].
DEBUG 2020-02-11 06:46:47,820 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x06]
DEBUG 2020-02-11 06:46:47,820 (Z-Wave): RX_Frame_Layer              : ACK -> Data frame [0x01, 0x04, 0x00, 0x41, 0x3C, 0x86] transmission OK.
DEBUG 2020-02-11 06:46:47,820 (Z-Wave): RX_Session_Layer            : ACK -> Z-Wave function 'ZW_GetNodeProtocolInfo(NodeID=60)' has been successfully sent - waiting 5 000 [ms] for response frame.
DEBUG 2020-02-11 06:46:47,820 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x01]
DEBUG 2020-02-11 06:46:47,820 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x09, 0x01, 0x41, 0x53, 0xDC, 0x01, 0x04, 0x40, 0x03, 0x7F]
DEBUG 2020-02-11 06:46:47,820 (Z-Wave): RX_Frame_Layer              : Data frame [0x01, 0x09, 0x01, 0x41, 0x53, 0xDC, 0x01, 0x04, 0x40, 0x03, 0x7F] has been received.
DEBUG 2020-02-11 06:46:47,820 (Z-Wave): RX_Session_Layer            : Response received [0x01, 0x09, 0x01, 0x41, 0x53, 0xDC, 0x01, 0x04, 0x40, 0x03, 0x7F] -> Z-Wave function 'ZW_GetNodeProtocolInfo(NodeID=60)' successfully executed.
DEBUG 2020-02-11 06:46:47,821 (Z-Wave): RX_Session_Layer            : Removed function from pending transaction list (size='0') : ZW_SendData(NodeID=60, Payload=[0x98, 0x04, 0x00], TxOptions=[TRANSMIT_OPTION_AUTO_ROUTE, TRANSMIT_EXPLORE_OPTION_ACK], CallbackID=0x22)
DEBUG 2020-02-11 06:46:47,821 (Z-Wave): Node_Initializer            : Node '60' : [ZW_RequestNodeInfo, (Retry='1')]
DEBUG 2020-02-11 06:46:47,821 (Z-Wave): Controller_API              : Enqueue (WORKING-Queue, Count=1) Z-Wave function call 'ZW_RequestNodeInfo(NodeID=60)'.
DEBUG 2020-02-11 06:46:47,821 (Z-Wave): Controller_API              : Dequeue (WORKING-Queue, Count=0) Z-Wave function call 'ZW_RequestNodeInfo(NodeID=60)'.
DEBUG 2020-02-11 06:46:47,821 (Z-Wave): TX_Session_Layer            : Executing Z-Wave function call 'ZW_RequestNodeInfo(NodeID=60)'...
INFO 2020-02-11 06:46:47,821 (Z-Wave):  Controller                  : Z-Wave node info (ID=60) : [[Device Classes : 'BASIC_TYPE_ROUTING_SLAVE','GENERIC_TYPE_ENTRY_CONTROL','SPECIFIC_TYPE_SECURE_KEYPAD_DOOR_LOCK'],[Capabilities : 'NODEINFO_CAPABILITY_ROUTING'],[Security : 'NODEINFO_SECURITY_FLIRS_WAKEUP_1000','NODEINFO_SECURITY_OPTIONAL_FUNC_SUPPORT']].
DEBUG 2020-02-11 06:46:47,821 (Z-Wave): ZW_RequestNodeInfo          : Sending Z-Wave function 'ZW_RequestNodeInfo(NodeID=60)' call.
DEBUG 2020-02-11 06:46:47,837 (Z-Wave): TX_Frame_Layer              : Send data frame [0x01, 0x04, 0x00, 0x60, 0x3C, 0xA7].
DEBUG 2020-02-11 06:46:47,852 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x06]
DEBUG 2020-02-11 06:46:47,852 (Z-Wave): RX_Frame_Layer              : ACK -> Data frame [0x01, 0x04, 0x00, 0x60, 0x3C, 0xA7] transmission OK.
DEBUG 2020-02-11 06:46:47,852 (Z-Wave): RX_Session_Layer            : ACK -> Z-Wave function 'ZW_RequestNodeInfo(NodeID=60)' has been successfully sent - waiting 5 000 [ms] for response frame.
DEBUG 2020-02-11 06:46:47,856 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x01]
DEBUG 2020-02-11 06:46:47,856 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x04, 0x01, 0x60, 0x01, 0x9B]
DEBUG 2020-02-11 06:46:47,856 (Z-Wave): RX_Frame_Layer              : Data frame [0x01, 0x04, 0x01, 0x60, 0x01, 0x9B] has been received.
DEBUG 2020-02-11 06:46:47,856 (Z-Wave): RX_Session_Layer            : Response received [0x01, 0x04, 0x01, 0x60, 0x01, 0x9B] -> Waiting 65 000 [ms] for callback of Z-Wave function call 'ZW_RequestNodeInfo(NodeID=60)'.
DEBUG 2020-02-11 06:46:49,121 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x01]
DEBUG 2020-02-11 06:46:49,121 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x0F, 0x00, 0x49, 0x84, 0x3C, 0x09, 0x04, 0x40, 0x03, 0x5E, 0x98, 0x9F, 0x55, 0x72, 0x8A, 0xBB]
DEBUG 2020-02-11 06:46:49,121 (Z-Wave): RX_Frame_Layer              : Data frame [0x01, 0x0F, 0x00, 0x49, 0x84, 0x3C, 0x09, 0x04, 0x40, 0x03, 0x5E, 0x98, 0x9F, 0x55, 0x72, 0x8A, 0xBB] has been received.
DEBUG 2020-02-11 06:46:49,121 (Z-Wave): RX_Session_Layer            : Callback received [0x01, 0x0F, 0x00, 0x49, 0x84, 0x3C, 0x09, 0x04, 0x40, 0x03, 0x5E, 0x98, 0x9F, 0x55, 0x72, 0x8A, 0xBB] -> Z-Wave function 'ZW_RequestNodeInfo(NodeID=60)' successfully executed.
DEBUG 2020-02-11 06:46:49,121 (Z-Wave): Node_Initializer            : Node '60' : [ZW_RequestNodeInfo, (Retry='1')] succeeded : [[Status: UPDATE_STATE_NODE_INFO_RECEIVED, Node ID: 60, Device Classes: [Basic: BASIC_TYPE_ROUTING_SLAVE, Generic: GENERIC_TYPE_ENTRY_CONTROL, Specific: SPECIFIC_TYPE_SECURE_KEYPAD_DOOR_LOCK], Command Classes: [Supported: [COMMAND_CLASS_ZWAVEPLUS_INFO, COMMAND_CLASS_SECURITY, 0x9F, COMMAND_CLASS_TRANSPORT_SERVICE, COMMAND_CLASS_MANUFACTURER_SPECIFIC, COMMAND_CLASS_TIME], Controlled: [ -- ]]]].
DEBUG 2020-02-11 06:46:49,121 (Z-Wave): Node_Initializer            : Node '60' : [ZW_GetNodeProtocolInfo]...
DEBUG 2020-02-11 06:46:49,121 (Z-Wave): Controller_API              : Enqueue (WORKING-Queue, Count=1) Z-Wave function call 'ZW_GetNodeProtocolInfo(NodeID=60)'.
DEBUG 2020-02-11 06:46:49,121 (Z-Wave): Controller_API              : Dequeue (WORKING-Queue, Count=0) Z-Wave function call 'ZW_GetNodeProtocolInfo(NodeID=60)'.
DEBUG 2020-02-11 06:46:49,121 (Z-Wave): TX_Session_Layer            : Executing Z-Wave function call 'ZW_GetNodeProtocolInfo(NodeID=60)'...
DEBUG 2020-02-11 06:46:49,121 (Z-Wave): TX_Frame_Layer              : Send data frame [0x01, 0x04, 0x00, 0x41, 0x3C, 0x86].
DEBUG 2020-02-11 06:46:49,121 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x06]
DEBUG 2020-02-11 06:46:49,121 (Z-Wave): RX_Frame_Layer              : ACK -> Data frame [0x01, 0x04, 0x00, 0x41, 0x3C, 0x86] transmission OK.
DEBUG 2020-02-11 06:46:49,121 (Z-Wave): RX_Session_Layer            : ACK -> Z-Wave function 'ZW_GetNodeProtocolInfo(NodeID=60)' has been successfully sent - waiting 5 000 [ms] for response frame.
DEBUG 2020-02-11 06:46:49,121 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x01]
DEBUG 2020-02-11 06:46:49,121 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x09, 0x01, 0x41, 0x53, 0xDC, 0x01, 0x04, 0x40, 0x03, 0x7F]
DEBUG 2020-02-11 06:46:49,121 (Z-Wave): RX_Frame_Layer              : Data frame [0x01, 0x09, 0x01, 0x41, 0x53, 0xDC, 0x01, 0x04, 0x40, 0x03, 0x7F] has been received.
DEBUG 2020-02-11 06:46:49,121 (Z-Wave): RX_Session_Layer            : Response received [0x01, 0x09, 0x01, 0x41, 0x53, 0xDC, 0x01, 0x04, 0x40, 0x03, 0x7F] -> Z-Wave function 'ZW_GetNodeProtocolInfo(NodeID=60)' successfully executed.
DEBUG 2020-02-11 06:46:49,121 (Z-Wave): Node_Initializer            : Node '60' : [ZW_GetNodeProtocolInfo] : [[Device Classes : 'BASIC_TYPE_ROUTING_SLAVE','GENERIC_TYPE_ENTRY_CONTROL','SPECIFIC_TYPE_SECURE_KEYPAD_DOOR_LOCK'],[Capabilities : 'NODEINFO_CAPABILITY_ROUTING'],[Security : 'NODEINFO_SECURITY_FLIRS_WAKEUP_1000','NODEINFO_SECURITY_OPTIONAL_FUNC_SUPPORT']].
DEBUG 2020-02-11 06:46:49,121 (Z-Wave): Node_Initializer            : Node '60' : [COMMAND_CLASS_MANUFACTURER_SPECIFIC::MANUFACTURER_SPECIFIC_GET (Retry='1')]...
DEBUG 2020-02-11 06:46:49,121 (Z-Wave): Controller_API              : Enqueue (WORKING-Queue, Count=1) Z-Wave function call 'ZW_SendData(NodeID=60, Payload=[0x72, 0x04], TxOptions=[TRANSMIT_OPTION_AUTO_ROUTE, TRANSMIT_EXPLORE_OPTION_ACK], CallbackID=0x00)'.
DEBUG 2020-02-11 06:46:49,121 (Z-Wave): Controller_API              : Dequeue (WORKING-Queue, Count=0) Z-Wave function call 'ZW_SendData(NodeID=60, Payload=[0x72, 0x04], TxOptions=[TRANSMIT_OPTION_AUTO_ROUTE, TRANSMIT_EXPLORE_OPTION_ACK], CallbackID=0x00)'.
DEBUG 2020-02-11 06:46:49,121 (Z-Wave): TX_Session_Layer            : Executing Z-Wave function call 'ZW_SendData(NodeID=60, Payload=[0x72, 0x04], TxOptions=[TRANSMIT_OPTION_AUTO_ROUTE, TRANSMIT_EXPLORE_OPTION_ACK], CallbackID=0x00)'...
DEBUG 2020-02-11 06:46:49,121 (Z-Wave): TX_Session_Layer            : Send (repeat count=1) Z-Wave function 'ZW_SendData(NodeID=60, Payload=[0x72, 0x04], TxOptions=[TRANSMIT_OPTION_AUTO_ROUTE, TRANSMIT_EXPLORE_OPTION_ACK], CallbackID=0x23)' request (callback ID=0x23).
DEBUG 2020-02-11 06:46:49,121 (Z-Wave): TX_Frame_Layer              : Send data frame [0x01, 0x09, 0x00, 0x13, 0x3C, 0x02, 0x72, 0x04, 0x05, 0x23, 0x8B].
DEBUG 2020-02-11 06:46:49,121 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x06]
DEBUG 2020-02-11 06:46:49,121 (Z-Wave): RX_Frame_Layer              : ACK -> Data frame [0x01, 0x09, 0x00, 0x13, 0x3C, 0x02, 0x72, 0x04, 0x05, 0x23, 0x8B] transmission OK.
DEBUG 2020-02-11 06:46:49,121 (Z-Wave): RX_Session_Layer            : ACK -> Z-Wave function 'ZW_SendData(NodeID=60, Payload=[0x72, 0x04], TxOptions=[TRANSMIT_OPTION_AUTO_ROUTE, TRANSMIT_EXPLORE_OPTION_ACK], CallbackID=0x23)' has been successfully sent - waiting 5 000 [ms] for response frame.
DEBUG 2020-02-11 06:46:49,121 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x01]
DEBUG 2020-02-11 06:46:49,121 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x04, 0x01, 0x13, 0x01, 0xE8]
DEBUG 2020-02-11 06:46:49,121 (Z-Wave): RX_Frame_Layer              : Data frame [0x01, 0x04, 0x01, 0x13, 0x01, 0xE8] has been received.
DEBUG 2020-02-11 06:46:49,121 (Z-Wave): RX_Session_Layer            : 'ZW_SendData' response [0x01, 0x04, 0x01, 0x13, 0x01, 0xE8] with status 'RETURN_VALUE_TRUE' received (callback ID=0x23).
DEBUG 2020-02-11 06:46:49,121 (Z-Wave): RX_Session_Layer            : Waiting 64 997 [ms] for 'ZW_SendData' callback frame (callback ID=0x23).
DEBUG 2020-02-11 06:46:50,348 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x01]
DEBUG 2020-02-11 06:46:50,348 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x05, 0x00, 0x13, 0x23, 0x00, 0xCA]
DEBUG 2020-02-11 06:46:50,348 (Z-Wave): RX_Frame_Layer              : Data frame [0x01, 0x05, 0x00, 0x13, 0x23, 0x00, 0xCA] has been received.
DEBUG 2020-02-11 06:46:50,348 (Z-Wave): RX_Session_Layer            : Callback [0x01, 0x05, 0x00, 0x13, 0x23, 0x00, 0xCA] (callback ID=0x23) with state 'TRANSMIT_COMPLETE_OK' received -> Z-Wave function 'ZW_SendData(NodeID=60, Payload=[0x72, 0x04], TxOptions=[TRANSMIT_OPTION_AUTO_ROUTE, TRANSMIT_EXPLORE_OPTION_ACK], CallbackID=0x23)' successfully executed.
DEBUG 2020-02-11 06:46:50,348 (Z-Wave): RX_Session_Layer            : Add function to pending transaction list (size='1') : ZW_SendData(NodeID=60, Payload=[0x72, 0x04], TxOptions=[TRANSMIT_OPTION_AUTO_ROUTE, TRANSMIT_EXPLORE_OPTION_ACK], CallbackID=0x23)
DEBUG 2020-02-11 06:46:50,431 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x01]
DEBUG 2020-02-11 06:46:50,431 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x0E, 0x00, 0x04, 0x00, 0x3C, 0x08, 0x72, 0x05, 0x01, 0x0E, 0x00, 0x09, 0x00, 0x01, 0xB1]
DEBUG 2020-02-11 06:46:50,431 (Z-Wave): RX_Frame_Layer              : Data frame [0x01, 0x0E, 0x00, 0x04, 0x00, 0x3C, 0x08, 0x72, 0x05, 0x01, 0x0E, 0x00, 0x09, 0x00, 0x01, 0xB1] has been received.
DEBUG 2020-02-11 06:46:50,431 (Z-Wave): Node_Initializer            : Node '60' : [COMMAND_CLASS_MANUFACTURER_SPECIFIC::MANUFACTURER_SPECIFIC_REPORT (Retry='1'), Manufacturer='Poly-control', ProductTypeID='0x0009', ProductID='0x0001'].
DEBUG 2020-02-11 06:46:50,431 (Z-Wave): Node_Initializer            : Node '60' : Configure parameters...
DEBUG 2020-02-11 06:46:50,431 (Z-Wave): Node_Initializer            : Node '60' : ====== Init static data of command classes...
DEBUG 2020-02-11 06:46:50,431 (Z-Wave): RX_Session_Layer            : Removed function from pending transaction list (size='0') : ZW_SendData(NodeID=60, Payload=[0x72, 0x04], TxOptions=[TRANSMIT_OPTION_AUTO_ROUTE, TRANSMIT_EXPLORE_OPTION_ACK], CallbackID=0x23)
DEBUG 2020-02-11 06:46:50,431 (Z-Wave): Node_Initializer            : Node '60' : ------ Update static data of : [COMMAND_CLASS_ZWAVEPLUS_INFO]
DEBUG 2020-02-11 06:46:50,431 (Z-Wave): Node_Initializer            : Node '60:0' : [COMMAND_CLASS_ZWAVEPLUS_INFO::ZWAVEPLUS_INFO_GET (Retry='1')]
DEBUG 2020-02-11 06:46:50,431 (Z-Wave): Controller_API              : Enqueue (WORKING-Queue, Count=1) Z-Wave function call 'ZW_SendData(NodeID=60, Payload=[0x5E, 0x01], TxOptions=[TRANSMIT_OPTION_AUTO_ROUTE, TRANSMIT_EXPLORE_OPTION_ACK], CallbackID=0x00)'.
DEBUG 2020-02-11 06:46:50,431 (Z-Wave): Controller_API              : Dequeue (WORKING-Queue, Count=0) Z-Wave function call 'ZW_SendData(NodeID=60, Payload=[0x5E, 0x01], TxOptions=[TRANSMIT_OPTION_AUTO_ROUTE, TRANSMIT_EXPLORE_OPTION_ACK], CallbackID=0x00)'.
DEBUG 2020-02-11 06:46:50,431 (Z-Wave): TX_Session_Layer            : Executing Z-Wave function call 'ZW_SendData(NodeID=60, Payload=[0x5E, 0x01], TxOptions=[TRANSMIT_OPTION_AUTO_ROUTE, TRANSMIT_EXPLORE_OPTION_ACK], CallbackID=0x00)'...
DEBUG 2020-02-11 06:46:50,431 (Z-Wave): TX_Session_Layer            : Send (repeat count=1) Z-Wave function 'ZW_SendData(NodeID=60, Payload=[0x5E, 0x01], TxOptions=[TRANSMIT_OPTION_AUTO_ROUTE, TRANSMIT_EXPLORE_OPTION_ACK], CallbackID=0x24)' request (callback ID=0x24).
DEBUG 2020-02-11 06:46:50,431 (Z-Wave): TX_Frame_Layer              : Send data frame [0x01, 0x09, 0x00, 0x13, 0x3C, 0x02, 0x5E, 0x01, 0x05, 0x24, 0xA5].
DEBUG 2020-02-11 06:46:50,431 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x06]
DEBUG 2020-02-11 06:46:50,431 (Z-Wave): RX_Frame_Layer              : ACK -> Data frame [0x01, 0x09, 0x00, 0x13, 0x3C, 0x02, 0x5E, 0x01, 0x05, 0x24, 0xA5] transmission OK.
DEBUG 2020-02-11 06:46:50,431 (Z-Wave): RX_Session_Layer            : ACK -> Z-Wave function 'ZW_SendData(NodeID=60, Payload=[0x5E, 0x01], TxOptions=[TRANSMIT_OPTION_AUTO_ROUTE, TRANSMIT_EXPLORE_OPTION_ACK], CallbackID=0x24)' has been successfully sent - waiting 5 000 [ms] for response frame.
DEBUG 2020-02-11 06:46:50,431 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x01]
DEBUG 2020-02-11 06:46:50,431 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x04, 0x01, 0x13, 0x01, 0xE8]
DEBUG 2020-02-11 06:46:50,431 (Z-Wave): RX_Frame_Layer              : Data frame [0x01, 0x04, 0x01, 0x13, 0x01, 0xE8] has been received.
DEBUG 2020-02-11 06:46:50,431 (Z-Wave): RX_Session_Layer            : 'ZW_SendData' response [0x01, 0x04, 0x01, 0x13, 0x01, 0xE8] with status 'RETURN_VALUE_TRUE' received (callback ID=0x24).
DEBUG 2020-02-11 06:46:50,431 (Z-Wave): RX_Session_Layer            : Waiting 64 996 [ms] for 'ZW_SendData' callback frame (callback ID=0x24).
DEBUG 2020-02-11 06:46:51,664 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x01]
DEBUG 2020-02-11 06:46:51,664 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x05, 0x00, 0x13, 0x24, 0x00, 0xCD]
DEBUG 2020-02-11 06:46:51,664 (Z-Wave): RX_Frame_Layer              : Data frame [0x01, 0x05, 0x00, 0x13, 0x24, 0x00, 0xCD] has been received.
DEBUG 2020-02-11 06:46:51,664 (Z-Wave): RX_Session_Layer            : Callback [0x01, 0x05, 0x00, 0x13, 0x24, 0x00, 0xCD] (callback ID=0x24) with state 'TRANSMIT_COMPLETE_OK' received -> Z-Wave function 'ZW_SendData(NodeID=60, Payload=[0x5E, 0x01], TxOptions=[TRANSMIT_OPTION_AUTO_ROUTE, TRANSMIT_EXPLORE_OPTION_ACK], CallbackID=0x24)' successfully executed.
DEBUG 2020-02-11 06:46:51,664 (Z-Wave): RX_Session_Layer            : Add function to pending transaction list (size='1') : ZW_SendData(NodeID=60, Payload=[0x5E, 0x01], TxOptions=[TRANSMIT_OPTION_AUTO_ROUTE, TRANSMIT_EXPLORE_OPTION_ACK], CallbackID=0x24)
DEBUG 2020-02-11 06:46:51,736 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x01]
DEBUG 2020-02-11 06:46:51,736 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x0F, 0x00, 0x04, 0x00, 0x3C, 0x09, 0x5E, 0x02, 0x01, 0x07, 0x00, 0x03, 0x00, 0x03, 0x00, 0x9B]
DEBUG 2020-02-11 06:46:51,736 (Z-Wave): RX_Frame_Layer              : Data frame [0x01, 0x0F, 0x00, 0x04, 0x00, 0x3C, 0x09, 0x5E, 0x02, 0x01, 0x07, 0x00, 0x03, 0x00, 0x03, 0x00, 0x9B] has been received.
DEBUG 2020-02-11 06:46:51,736 (Z-Wave): Node_Initializer            : Node '60:0' : [COMMAND_CLASS_ZWAVEPLUS_INFO::ZWAVEPLUS_INFO_REPORT (Retry='1'), Version : '1', RoleType : 'ZWAVEPLUS_ROLE_TYPE_SLAVE_SLEEPING_LISTENING', NodeType : 'ZWAVEPLUS_NODE_TYPE_NODE']
DEBUG 2020-02-11 06:46:51,736 (Z-Wave): Node_Initializer            : Node '60' : ------ Update static data of : [COMMAND_CLASS_MANUFACTURER_SPECIFIC]
DEBUG 2020-02-11 06:46:51,736 (Z-Wave): RX_Session_Layer            : Removed function from pending transaction list (size='0') : ZW_SendData(NodeID=60, Payload=[0x5E, 0x01], TxOptions=[TRANSMIT_OPTION_AUTO_ROUTE, TRANSMIT_EXPLORE_OPTION_ACK], CallbackID=0x24)
DEBUG 2020-02-11 06:46:51,736 (Z-Wave): Node_Initializer            : Node '60' : ------ Update static data of : [COMMAND_CLASS_BASIC]
DEBUG 2020-02-11 06:46:51,736 (Z-Wave): Node_Initializer            : Node '60' : Configure associations...
DEBUG 2020-02-11 06:46:51,736 (Z-Wave): Node_Initializer            : Node '60' : Configure wake up notification ID...
DEBUG 2020-02-11 06:46:51,736 (Z-Wave): Node_Initializer            : Node '60' : ====== Update dynamic data of command classes...
DEBUG 2020-02-11 06:46:51,736 (Z-Wave): Node_Initializer            : Node '60' : ------ Update dynamic data of : [COMMAND_CLASS_ZWAVEPLUS_INFO]
DEBUG 2020-02-11 06:46:51,736 (Z-Wave): Node_Initializer            : Node '60' : ------ Update dynamic data of : [COMMAND_CLASS_MANUFACTURER_SPECIFIC]
DEBUG 2020-02-11 06:46:51,736 (Z-Wave): Node_Initializer            : Node '60' : ------ Update dynamic data of : [COMMAND_CLASS_BASIC]
DEBUG 2020-02-11 06:46:51,736 (Z-Wave): Node_Initializer            : Node '60:0' : [COMMAND_CLASS_BASIC::BASIC_GET (Retry='1')]
DEBUG 2020-02-11 06:46:51,736 (Z-Wave): Controller_API              : Enqueue (WORKING-Queue, Count=1) Z-Wave function call 'ZW_SendData(NodeID=60, Payload=[0x20, 0x02], TxOptions=[TRANSMIT_OPTION_AUTO_ROUTE, TRANSMIT_EXPLORE_OPTION_ACK], CallbackID=0x00)'.
DEBUG 2020-02-11 06:46:51,736 (Z-Wave): Controller_API              : Dequeue (WORKING-Queue, Count=0) Z-Wave function call 'ZW_SendData(NodeID=60, Payload=[0x20, 0x02], TxOptions=[TRANSMIT_OPTION_AUTO_ROUTE, TRANSMIT_EXPLORE_OPTION_ACK], CallbackID=0x00)'.
DEBUG 2020-02-11 06:46:51,736 (Z-Wave): TX_Session_Layer            : Executing Z-Wave function call 'ZW_SendData(NodeID=60, Payload=[0x20, 0x02], TxOptions=[TRANSMIT_OPTION_AUTO_ROUTE, TRANSMIT_EXPLORE_OPTION_ACK], CallbackID=0x00)'...
DEBUG 2020-02-11 06:46:51,736 (Z-Wave): TX_Session_Layer            : Send (repeat count=1) Z-Wave function 'ZW_SendData(NodeID=60, Payload=[0x20, 0x02], TxOptions=[TRANSMIT_OPTION_AUTO_ROUTE, TRANSMIT_EXPLORE_OPTION_ACK], CallbackID=0x25)' request (callback ID=0x25).
DEBUG 2020-02-11 06:46:51,736 (Z-Wave): TX_Frame_Layer              : Send data frame [0x01, 0x09, 0x00, 0x13, 0x3C, 0x02, 0x20, 0x02, 0x05, 0x25, 0xD9].
DEBUG 2020-02-11 06:46:51,745 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x06]
DEBUG 2020-02-11 06:46:51,745 (Z-Wave): RX_Frame_Layer              : ACK -> Data frame [0x01, 0x09, 0x00, 0x13, 0x3C, 0x02, 0x20, 0x02, 0x05, 0x25, 0xD9] transmission OK.
DEBUG 2020-02-11 06:46:51,745 (Z-Wave): RX_Session_Layer            : ACK -> Z-Wave function 'ZW_SendData(NodeID=60, Payload=[0x20, 0x02], TxOptions=[TRANSMIT_OPTION_AUTO_ROUTE, TRANSMIT_EXPLORE_OPTION_ACK], CallbackID=0x25)' has been successfully sent - waiting 5 000 [ms] for response frame.
DEBUG 2020-02-11 06:46:51,747 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x01]
DEBUG 2020-02-11 06:46:51,748 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x04, 0x01, 0x13, 0x01, 0xE8]
DEBUG 2020-02-11 06:46:51,748 (Z-Wave): RX_Frame_Layer              : Data frame [0x01, 0x04, 0x01, 0x13, 0x01, 0xE8] has been received.
DEBUG 2020-02-11 06:46:51,748 (Z-Wave): RX_Session_Layer            : 'ZW_SendData' response [0x01, 0x04, 0x01, 0x13, 0x01, 0xE8] with status 'RETURN_VALUE_TRUE' received (callback ID=0x25).
DEBUG 2020-02-11 06:46:51,748 (Z-Wave): RX_Session_Layer            : Waiting 64 996 [ms] for 'ZW_SendData' callback frame (callback ID=0x25).
DEBUG 2020-02-11 06:46:52,958 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x01]
DEBUG 2020-02-11 06:46:52,973 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x05, 0x00, 0x13, 0x25, 0x00, 0xCC]
DEBUG 2020-02-11 06:46:52,973 (Z-Wave): RX_Frame_Layer              : Data frame [0x01, 0x05, 0x00, 0x13, 0x25, 0x00, 0xCC] has been received.
DEBUG 2020-02-11 06:46:52,973 (Z-Wave): RX_Session_Layer            : Callback [0x01, 0x05, 0x00, 0x13, 0x25, 0x00, 0xCC] (callback ID=0x25) with state 'TRANSMIT_COMPLETE_OK' received -> Z-Wave function 'ZW_SendData(NodeID=60, Payload=[0x20, 0x02], TxOptions=[TRANSMIT_OPTION_AUTO_ROUTE, TRANSMIT_EXPLORE_OPTION_ACK], CallbackID=0x25)' successfully executed.
DEBUG 2020-02-11 06:46:52,973 (Z-Wave): RX_Session_Layer            : Add function to pending transaction list (size='1') : ZW_SendData(NodeID=60, Payload=[0x20, 0x02], TxOptions=[TRANSMIT_OPTION_AUTO_ROUTE, TRANSMIT_EXPLORE_OPTION_ACK], CallbackID=0x25)
DEBUG 2020-02-11 06:46:53,038 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x01]
DEBUG 2020-02-11 06:46:53,038 (Z-Wave): RX_Serial_Port_RXTX         : Data bytes read : [0x0B, 0x00, 0x04, 0x00, 0x3C, 0x05, 0x20, 0x03, 0x00, 0xFF, 0xFE, 0xEB]
DEBUG 2020-02-11 06:46:53,038 (Z-Wave): RX_Frame_Layer              : Data frame [0x01, 0x0B, 0x00, 0x04, 0x00, 0x3C, 0x05, 0x20, 0x03, 0x00, 0xFF, 0xFE, 0xEB] has been received.
DEBUG 2020-02-11 06:46:53,038 (Z-Wave): Node_Initializer            : Node '60:0' : [COMMAND_CLASS_BASIC::BASIC_REPORT (Retry='1'), Value='0']
DEBUG 2020-02-11 06:46:53,038 (Z-Wave): RX_Session_Layer            : Removed function from pending transaction list (size='0') : ZW_SendData(NodeID=60, Payload=[0x20, 0x02], TxOptions=[TRANSMIT_OPTION_AUTO_ROUTE, TRANSMIT_EXPLORE_OPTION_ACK], CallbackID=0x25)
INFO 2020-02-11 06:46:53,038 (Z-Wave): Node '60' : Node [Manufacturer='Poly-control', Type='Unknown'] has been successfully initialized.
DEBUG 2020-02-11 06:46:53,053 (Z-Wave): Node                        : Node '60' : Node has been successfully initialized with the following command classes...
DEBUG 2020-02-11 06:46:53,053 (Z-Wave): Node                        : Node '60' : --> 'COMMAND_CLASS_BASIC', 'supported'.
DEBUG 2020-02-11 06:46:53,053 (Z-Wave): Node                        : Node '60' : --> 'COMMAND_CLASS_MANUFACTURER_SPECIFIC', 'supported'.
DEBUG 2020-02-11 06:46:53,053 (Z-Wave): Node                        : Node '60' : --> 'COMMAND_CLASS_ZWAVEPLUS_INFO', 'supported'.